The parameters of 12-volt deep cycle lead-acid batteries are crucial to understanding their performance and usage. These parameters not only reflect the basic characteristics of the battery, but also directly related to the service life and safety of the battery. Here are some key parameters and how to interpret them,

    First, we need to focus on the capacity of the battery. Capacity is an important measure of a battery's ability to store electrical energy, usually expressed in ampere-hours (Ah) or milliampere-hours (mAh). It determines how much current the battery can provide and for how long. For deep-cycle lead-acid batteries, larger capacity means that the battery can support longer discharge, which is suitable for devices that need to run for a long time. Second, the rated voltage is another important parameter. It represents the potential difference between the positive and negative terminals of the battery, usually in volts (V). For 12 volt deep cycle lead-acid batteries, the rated voltage should be 12V. In actual use, the battery voltage will fluctuate under the influence of discharge current, temperature and other factors, so understanding the rated voltage helps us to judge the working state of the battery.

12 v deep cycle lead-acid battery is a kind of commonly used in solar power system, UPS system, standby power supply in areas such as battery power system. Understanding the detailed parameters of this battery is essential for the correct selection and use of the battery. Below we will describe in detail how to look at the parameters of the 12-volt deep cycle lead-acid battery. 1. Rated voltage

12 volt deep cycle lead-acid batteries have a rated voltage of 12 volts, which is the standard voltage output of this type of battery. When purchasing a battery, ensure that the rated voltage of the selected battery meets the voltage requirements of the device to avoid problems caused by mismatching.

2. Capacity

2. Capacity

2. Capacity

2. Capacity

2. Capacity

1. The capacity of the 12-volt deep cycle lead-acid battery directly affects the battery life, and the capacity should be determined according to actual needs.

3. Cycle life

    Cycle life refers to the number of cycles a battery can perform under a specific deep cycle discharge. This is an important parameter to measure the durability of the battery, and the cycle life of the 12-volt deep cycle lead-acid battery is directly related to the service life and performance of the battery.

In addition to the above core parameters, there are other important parameters to pay attention to, such as the self-discharge rate of the battery, charging temperature range, discharge temperature range, charging mode, shape and size. When choosing 12-volt deep cycle lead-acid batteries, these parameters can better meet the actual needs.

By understanding and understanding the parameters of the 12-volt deep cycle lead-acid battery, you can help users better choose the battery that is suitable for their needs, and correctly use and maintain the battery, extend the service life of the battery, and improve the performance of the battery.

    The depth of discharge is also a parameter that needs attention. It represents the percentage of the battery's rated capacity released during discharge. Deep-cycle lead-acid batteries usually have a higher depth of discharge, which means that they are able to make fuller use of the stored electrical energy. However, excessive discharge can cause damage to the battery, so it is necessary to avoid discharging the battery to too low a state in actual use. Finally, we should also pay attention to the battery cycle life. Cycle life indicates the number of charges and discharges a battery can withstand under certain conditions. Deep cycle lead-acid batteries usually have a long cycle life, but this is also affected by the depth of discharge, charging mode, working environment and other factors. Understanding the cycle life of the battery helps us develop a reasonable use and maintenance plan to extend the service life of the battery. When viewing these parameters, we also need to pay attention to whether the measurement methods and units of the parameters are unified to ensure the accuracy and comparability of the data. At the same time, for different brands and models of 12 volt deep cycle lead-acid batteries, their parameters may be different, so in the actual selection and use need to be considered according to specific needs.