Car portable charger, as a necessary accessory in modern car life, provides great convenience for charging digital products anytime and anywhere. However, the view of its charging voltage may be a slightly unfamiliar operation for some owners. Below, we will delve into how to view the charging voltage of the car portable charger and interpret it in detail. Before we buy, we need to make it clear that the charging voltage of the car portable charger is usually designed according to the electrical system of the car. In general, there are two types of input voltage for the car charger, which are 12V and 24V. Among them, cars usually use 12V input voltage, while trucks use 24V input voltage. This is because the electrical system voltage of different models is different, so different input voltages need to be adapted to ensure the normal operation of the charger. Next, let's look at how to check the charging voltage of the car portable charger. Usually, the charging voltage information of the charger will be marked on the case of the charger, or it will be reflected in the instruction manual accompanying it. Owners can look closely at the charger's housing for a voltage identifier, which will usually appear in the form of "Input: 12V/24V." If there is no obvious identification on the case, then you can consult the manual, which will detail the parameters of the charger, including the charging voltage. Of course This is only some reference, the specific or need to consult the charger manufacturer to ask for specific use.

    in the market, some high-end car charger is equipped with the screen or light, can real-time display current charging voltage and charging status. This type of charger usually has a higher degree of intelligence and can provide more accurate charging services. The owner can judge the charging voltage and charging state of the charger by observing the change of the display or indicator light. After understanding how to view the charging voltage of the car portable charger, we also need to pay attention to some precautions on use. First of all, make sure that the charger used matches the voltage of the car's electrical system to avoid equipment damage or safety risks caused by the use of inappropriate chargers.

[methods of view of on-board portable charger charging voltage]

1, check the charger label

every on-board portable charger or marked on the label product on its output voltage and current. This is the most direct and accurate method. You can look directly at the label or manual on the charger to find the "Output voltage" column, which will usually indicate the voltage of the charger.

2, use a multimeter to measure

If you have a multimeter, you can also use it to measure the output voltage of the charger. The current output voltage can be read by setting the multimeter to DC voltage and connecting the red and black test pens to the positive and negative terminals of the charger respectively.

3, observe the charging state

Part of the car portable charger will display the charging state and voltage when charging. If your charger has a display or LED light indication, then you can directly observe these displays to determine the current charging voltage.

4, precautions

When viewing or measuring the charging voltage, you need to pay attention to safety. Ensure that the charger is turned off and that there is no current output, and avoid operating in the live state. In addition, if you are not familiar with electrical knowledge or operating electrical tools, it is recommended to ask a professional to assist you in operation.

Please note that different chargers may indicate their output voltage and current in different ways, if described in the product manual, it is best to refer to the product manual for review. At the same time, when buying a car portable charger, you should also pay attention to the choice of formal brands and channels to ensure the quality and safety of the product. The above content is for reference only, if you need more detailed information, it is recommended to consult an electronic product expert or consult the relevant product manual.

    Second, pay attention to observe the working state of the charger during the charging process, such as abnormal or faulty should stop use in time and seek the help of professional maintenance personnel. In addition, for the output voltage of the car charger, in general, after the circuit conversion of the DC/DC converter, the output voltage of the car charger is usually 5VDC. This is because the charging interface of most digital devices is based on the 5VDC standard design. Therefore, when choosing a car charger, the owner needs to ensure that its output voltage meets the charging needs of digital devices. Checking the charging voltage of the car portable charger is a relatively simple operation, just pay attention to the charger's housing logo or the user manual. At the same time, the owner also needs to pay attention to the use of the charger safety and precautions, to ensure that the digital equipment to provide stable and safe charging services. In the future car life, with the continuous progress and innovation of on-board charger technology, we believe that we will be able to enjoy a more convenient and efficient charging experience.